Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your 2004-5 Yamaha FZ1. It is highly recommended that you refer to your service manual before performing this installation.
Instructions:......
1. Remove the left-side engine mount bolt as seen in the left picture.
2. Install the longer slider using the new bolt and washer with one washer under the bolt head.
3. Tighten the engine mount bolt to the supplied locknut - DO NOT OVERTIGHTEN
4. Remove the right side engine mount bolt. (same place as the other side).
5. Install the other slider using the new bolt, nut and washers (supplied in this kit) with one washer under the bolt head.
6. Tighten the engine mount bolt to the factory specifications - DO NOT OVERTIGHTEN.
Included in the FZ1000 2005 Motovation frame slider kit:
(2) 10 x 140mm 1.5 bolts
(2) Stainless steel lock nuts
(2) Aluminum bushings (pressed into plastic)
(2) Plastic Frame Sliders (left-longer)
(4) Flat Washers
